Author: Trout's Staff
What We Say:
The Velocity is the true workhorse on the Lamson line. The Velocity is Lamson's lowest priced reel that still retains all of the key features that make Lamson one of the best reel lines on the market. The combination of the proven conical disc drag, machined bar stock aluminum, and a Type 3 anodized hard alox finish gives this reel all the benefits of its more expensive brethren. The Velocity is heavier than Lamson's higher prices reels, but still much lighter than most of its competition. I personally use this reel as my 5wt all around trout setup, and I've found that a little extra material is not necessarily a bad thing. The Velocity seems to bounce right back from my careless spills. The Type 3 anodize shows very little wear and the sealed drag is impervious to the many dunking it has received. At $250 dollars, this reel is a phenomenal value, capable of any situation, and arguably one of the most durable reels on the market.
What They Say:
LINE STORAGE FORMATOur large arbor reels maximize the benefits of large arbor design by maximizing the arbor diameter-to-width ratio. The spool is large in circumference and wide, so that line is stored in a shallow layer. The increased circumference provides high retrieve rate and eliminates line coil memory. The wide, shallow line layer means there is little radius change as line is pulled form the reel. This results in constant drag torque during long runs and eliminates the risk of tippets breaking due to drag force gain.
HARD ALOX FINISHAll of our premium reels (Vanquish, Waterworks ULA, Litespeed and Velocity) are offered in one fantastic finish only -- a proprietary combination of alloy selection and conversion coating that we call “Hard Alox”. The term Hard Alox is taken from the anodizing process itself, wherein the aluminum surface is converted to aluminum oxide. By increasing the coating thickness and reducing porosity, our Hard Alox coating is much more durable than any other reel. Ask a dealer for a demonstration and prepare to be impressed.
Hard Alox trumps the conventional and ubiquitous Type 2 anodize, a finish which emphasizes gloss and color selection over durability. In place of Type 2 we offer you enhanced resistance to abrasion, impact and corrosion and a look that tells the story of beauty which, while not being just “skin deep”, actually does start there.
DRAG SYSTEMThe drag system in all of our reels consists of a pair of precisely matched conical elements which are drawn together with spring tension to produce variable rates of smooth rotational braking. By re-configuring the surface area of traditional disks into a pair of matching conical elements we were able to seal the drag completely from moisture, salt and grit. And since the mass of the drag elements is centralized, the spool's rotating mass is much lower which makes the reel more responsive to light drag settings. Because the average radius of the contact surface is much smaller (being conical rather than disk-shaped), start-up torque is too low to measure. US Patent #5,915,639; other patents pending.
CLUTCHMost premium reels rely on a pawl type clutch mechanism. These are often vulnerable to stress related failure, contamination and wear. All of our reels employ a Torrington zero-lash roller clutch. This mechanism relies on the locking effect of a number of ramps and rollers to achieve torque transmission. There are no "teeth" or "steps" to break off or wear out. And the zero-lash feature means instant engagement. This improves feel and eliminates "spike" that the reel, line and leader experience when a typical pawl clutch hooks